Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2010 Nissan Armada- Video
Today on our 2010 Nissan Armada we're going to be taking a look at and installing the Tow Ready replacement multi-tow seven-way and four-pole trailer connector. Here's what this wiring looks like once it's installed on the vehicle. You've got your four-pole connector right over here on the side with dust cover. Then right here you've got your seven-way connector with the spring loaded cover, so when you're done using it it will snap back down into place to make sure either keeps out as much moisture and elements as possible to prolong the life of the connections in here. First thing we need to do is find our factory connector. On this one it's right here up inside the rear bumper above the hitch. I'll pop that out. more
9/9/2016 12:03:13 PM
Trailer Wiring Harness Installation - 2005 Nissan Armada- Video
Today on this 2005 Nissan Armada, were going to install part number 30955 from Hopkins. Now our Nissan here has part of a factory tow package. It has wires around at the back, but does not have the actual connector, so were going to use this part to finish up the connection, so we can plug in a trailer. All right, first off well go ahead and pull out the wire harness from the vehicle. Now normally this would have a cap, however on this particular vehicle it did not have the cap. Now well take our connector and plug it into it. Well also use some dielectric grease to help protect the leads as well. more
3/18/2013 10:24:02 PM
Trailer Wiring Harness Installation- 2008 Nissan Armada- Video
On this 2008 Nissan Armada we are going to install part number 118384 from Tow Ready. This wiring harness will use the factory port that is location behind the bumper approximately right here. Unsnap it from its clip, take off the cap, and install our Tow Ready part. :18 more
9/19/2011 11:17:44 AM
Filter Videos
Filter Videos
